> For the complete documentation index, see [llms.txt](https://luum.io/llms.txt).
> Canonical page: [XPD-P2H-G](https://luum.io/docs/data-sheets/xpd-p2h-g).

LUUM.IO

# **XPD-P2H** - DATA SHEET

_2-channel X-PoE® powered device_

![XPD-P2H](https://luum.io/guides/assets/xpd-p2h-g/p2h-hero.png)

## Product Overview

The X-PoE® powered device serves as an intermediary between the X-PoE® port and the connected LED lights or other devices, enabling power transmission and providing support for high power outputs.

The PD takes the RJ45 connection from an X-PoE® port and converts it to two separate channels, each with a pair of positive (+) and negative (-) conductors. These channels are used for powering LEDs or other compatible devices.

The PD is capable of providing a total power output of up to 130W, and can be daisy-chained to extend the power delivery to additional fixtures or devices.

## Configurations

| SKU | Description |
| --- | --- |
| XPD-P2H-G | X-PoE® powered device with X-PoE® default Class G (manual channel configuration, defaults to 100mA per channel) power detection. |

> **Note**
> Note: Auto configuration uses X-PoE® class negotiation so the upstream port automatically sets per-channel current on power-up. Manual configuration requires the per-channel current to be set on the upstream X-PoE® source.
>
## Features

| Feature | Description |
| --- | --- |
| **Power and connectors** | • (2) X-PoE® RJ45 ports (input and pass-through) with (2) output channels for optional individual control or connection to independent light engines<br>• Up to 130W total output power<br>• X-PoE® power pass-through for daisy-chained devices<br>• Automatic per-channel configuration with the upstream port |
| **Easy installation** | • Designed for low-voltage lighting power delivery<br>• Supports daisy chaining to extend power delivery to additional fixtures or devices<br>• Stab-in output connectors accept 14-26 AWG wires |
| **Certifications** | • UL 2108, CSA-C22.2 No. 250.2, X-PoE® |
| **Warranty** | • 5-year limited warranty |

### X-PoE Inputs

![X-PoE Inputs](https://luum.io/guides/assets/xpd-p2h-g/front-panel.png)

| Item | Description |
| --- | --- |
| 1 | X-PoE Power Input |
| 2 | X-PoE Power Pass-Thru |

### LED Outputs

![LED Outputs](https://luum.io/guides/assets/xpd-p2h-g/rear-panel.png)

| Item | Description |
| --- | --- |
| 1 | Channel 1 Output + / - (14-26AWG Wires) |
| 2 | Channel 2 Output + / - (14-26AWG Wires) |

## Specifications

| Category | Specification | Value |
| --- | --- | --- |
| **MECHANICAL** | Dimensions | 40.3 mm x 44.8 mm x 22.5 mm (1.59 in x 1.76 in x 0.89 in) |
|  | Weight | 0.46 lb (0.21 kg) |
| **INTERFACES** | Interfaces | (2) RJ45 X-PoE ports (input and pass-through), (2) individually controlled X-PoE lighting LED +/- outputs |
| **ELECTRICAL** | Power Input | 24VDC to 57VDC input from X-PoE port |
|  | Maximum Power Consumption | 130W (at 57VDC) with both channels fully loaded at 100%<br>Note: Maximum output power is dependent upon the input voltage and the forward voltage of the connected light engine. |
| **ENVIRONMENT** | Operating Temperature | -20 °C to +35 °C (-4 °F to 95 °F) indoor dry or damp locations only<br>Note: Devices may operate at higher or lower temperatures depending on enclosure and installation conditions. |
|  | Storage Temperature | -20 °C to +50 °C (-4 °F to +122 °F) |
| **GENERAL** | Certifications | UL 2108, CSA-C22.2 No. 250.2, X-PoE® |
|  | Warranty | 5-year limited warranty |

---

_Specifications extracted from docs.luum.io and should be validated against latest release._

_©2026 LUUM.IO. All rights reserved._
