> For the complete documentation index, see [llms.txt](https://luum.io/llms.txt).
> Canonical page: [X-PoE Amatis Integration Guide](https://luum.io/docs/amatis/programming/xpoe-amatis-integration).

LUUM.IO

# **X-PoE Amatis Integration Guide** - GUIDE

## About This Guide

Welcome to the integration guide for the XS-100 Series X-PoE lighting controller! In this guide, we will associate an X-PoE switch to a lighting controls site so that the ports can be programmed into rooms.

> **Note**
> This guide is only applicable to the Amatis Controls system.
>
## Necessary Parts

The following parts will be necessary to complete this guide:

1. A functional IP network
2. An X-PoE lighting controller
3. An Amatis Border Router (AMBR)

## System Setup

Before getting started with the system configuration, ensure the devices are properly connected. The Amatis Border Router and X-PoE lighting controllers should all have power and be connected to the same network. Once all devices have power and are online, begin by connecting to the [X-PoE lighting controller](https://luum.io/docs/install-guides/xs-108h#device_configuration) and the [Amatis Border Router](https://luum.io/docs/amatis/install-guides/ambr#initial_setup).

## Amatis Border Router Setup

Perform the following steps to ensure the Amatis Border Router is ready to integrate with an X-PoE lighting controls system:

1. [Update the AMBR](https://luum.io/docs/amatis/install-guides/ambr#updating_firmware) to ensure it is on the latest firmware.

2. Follow [these steps](https://luum.io/docs/amatis/programming/multi-ambr-config#main_ambr) to set the AMBR to be the main AMBR for the site.

> **Note**
> This step only needs to be done for the main AMBR of the site. Do not do this for any additional child AMBRs of the site.
>
3. Perform the following steps to enable the local event bus:

1. Begin by logging into the [Amatis Configuration App](https://app.amatiscontrols.com).
2. Navigate to the "AMBRs" table, select the three dots next to the AMBR, and select "Open AMBR Details".

    ![open_ambr_details](https://luum.io/guides/assets/xpoe-amatis-integration-guide/open_ambr_details.png)

3. Ensure "Local Event Bus Active" is set to "Enabled" and select "Save Changes".

    ![local_event_bus](https://luum.io/guides/assets/xpoe-amatis-integration-guide/local_event_bus.png)

> **Note**
> The local event bus must be enabled on all AMBRs that are a part of the site.
>
The Amatis Border Router is now ready to support X-PoE lighting controllers.

## X-PoE Lighting Controller Setup

Perform the following steps to ensure the X-PoE Lighting Controller is ready to integrate with an Amatis controls system:

1. [Update the X-PoE Lighting Controller](https://luum.io/docs/install-guides/xs-108h#firmware_update) to ensure it is on the latest firmware.
2. [Configure the channels](https://luum.io/docs/install-guides/xs-108h#channel_configuration) on the X-PoE Lighting Controller.
3. Connect the X-PoE lighting loads.

### Site Association

If there is only one main AMBR on the network, the X-PoE Lighting Controllers will automatically associate themselves to that AMBR. If this is not the case, or the X-PoE Lighting Controller is displaying the wrong site in the "Switch Info" section of the dashboard, perform the following steps to associate an X-PoE lighting controller to an Amatis Controls site:

1. Navigate to the configuration settings.

    ![config_settings](https://luum.io/guides/assets/xpoe-amatis-integration-guide/config_settings.png)

2. Select "General" and drop down the "Change Site ID" option in the configuration settings.

    ![site id setting](https://luum.io/guides/assets/xpoe-amatis-integration-guide/site_id_setting.png)

3. Enter the 3 character site ID of the site you wish to associate it with. This can be found in the URL of the Amatis App, or the first three characters of the main AMBR ID. The ID is printed on the packaging and on the bottom of the AMBR.

> **Example**
> An example AMBR ID looks like " _ _ _ 00F". When entering the site ID, only enter the first three characters of the AMBR ID, and ignore the 00F.
>
The X-PoE Lighting Controller has now been associated to the specified Amatis Controls site. The device and its outputs will now show up in the device table of the site and can be programmed into rooms.

## Related Information

### Technical Support

Questions about associating an X-PoE controller with a site can be sent to [support@luum.io](mailto:support@luum.io). Include the site and the step you are on.

### Document Feedback

While we have taken great care to ensure the accuracy and completeness of this document, we welcome your feedback and suggestions. If you notice any errors or omissions, or feel a topic could benefit from further explanation, please email your feedback to [support@luum.io](mailto:support@luum.io).

### Revision History

| Date | Revision | Notes |
| --- | --- | --- |
| 11/3/2026 | A | Converted to the current guide format. |

### Disclaimer

All rights, title, and interest in and to this guide, including without limitation all copyright, trademark, patent, trade secret, and other proprietary rights, belong solely and exclusively to Luum.io and/or its licensors. This guide is provided solely for the purpose of associating an X-PoE lighting controller with an Amatis site, and no license or other rights are granted or implied hereby. No part of this guide may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of Luum.io. The contents of this guide are subject to change without notice. The information contained herein is provided on an 'as is' basis and is for informational purposes only. Luum.io makes no warranty, express or implied, as to the accuracy, completeness, or usefulness of this information, nor does it assume any legal liability or responsibility for the consequences of any errors or omissions therein. The names of actual companies and products mentioned herein may be the trademarks of their respective owners.

---

_©2026 Luum.io. All rights reserved._
